In manufacture, the revolution in the mode of production begins with the labour-power, in modern industry it begins with the instruments of labour. Our first inquiry then is, how the instruments of labour are converted from tools into machines, or what is the difference between a machine and the implements of a handicraft?
On a closer examination of the working machine proper, we find in it, as a general rule, though often, no doubt, under very altered forms, the apparatus and tools used by the handicraftsman or manufacturing workman; with this difference, that instead of being human implements, they are the implements of a mechanism, or mechanical implements. Either the entire machine is only a more or less altered mechanical edition of the old handicraft tool, as, for instance, the power-loom, or the working parts fitted in the frame of the machine are old acquaintances, as spindles are in a mule, needles in a stocking-loom, saws in a sawing-machine, and knives in a chopping machine. The distinction between these tools and the body proper of the machine, exists from their very birth; for they continue for the most part to be produced by handicraft, or by manufacture, and are afterwards fitted into the body of the machine, which is the product of machinery. The machine proper is therefore a mechanism that, after being set in motion, performs with its tools the same operations that were formerly done by the workman with similar tools. Whether the motive power is derived from man, or from some other machine, makes no difference in this respect. From the moment that the tool proper is taken from m-an, and fitted into a mechanism, a machine takes the place of a mere implement. The difference strikes one at once, even in those cases where man himself continues to be the prime mover.
In many manual implements the distinction between man as mere motive power, and man as the workman or operator properlyso called, is brought into striking contrast. For instance, the foot is merely the prime mover of the spinning-wheel, while the hand, working with the spindle, and drawing and twisting, performs the real operation of spinning. It is this last part of the handicraftsman’s implement that is first seized upon by the industrial revolution, leaving to the workman, in addition to his new labour of watching the machine with his eyes and correcting its mistakes with his hands, the merely mechanical part of being the moving power. On the other hand, implements, in regard to which man has always acted as a simple motive power, as, for instance, by turning the crank of a mill, by pumping, by moving up and down the arm of a bellows, by pounding with a mortar, &c., such implements soon call for the application of animals, water and wind as motive powers.
The machine, which is the starting-point of the industrial revolution, supersedes the workman, who handles a single tool, by a mechanism operating with a number of similar tools, and set in motion by a single motive power, whatever the form of that power may be? Here we have the machine, but only as an elementary factor of production by machinery.
As soon as tools had been converted from being manual implements of man into implements of a mechanical apparatus, of a machine, the motive mechanism also acquired an independent form, entirely emancipated from the restraints of human strength. Thereupon the individual machine, that we have hitherto been considering, sinks into a mere factor in production by machinery. One motive mechanism was now able to drive many machines at once. The motive mechanism grows with the number of the machines that are turned simultaneously, and the transmitting mechanism becomes a wide-spreading apparatus.
We now proceed to distinguish the co-operation of a number of machines of one kind from a complex system of machinery.
In the one case, the product is entirely made by a single machine, which performs all the various operations previously done by one handicraftsman with his tool; as, for instance, by a weaver with his loom; or by several handicraftsman successively, either separately or as members of a system of Manufacture. Just as a number of tools, then, form the organs of a machine, so a number of machines of one kind constitute the organs of the motive mechanism.
A real machinery system, however, does not take the place of these independent machines, until the subject of labour goes through a connected series of detail processes, that are carried out by a chain of machines of various kinds, the one supplementing the other. Here we have again the co-operation by division of labour that characterizes Manufacture; only now, it is a combination of detail machines.
A system of machinery, whether it reposes on the mere co-operation of similar machines, as in weaving, or on a combination of different machines, as in spinning, constitutes in itself a huge automaton, whenever it is driven by a self-acting prime mover.
So, the implements of labour, in the form of machinery, necessitate the substitution of natural forces for human force, and the conscious application of science, instead of rule of thumb. In Manufacture, the organization of the social labour-process is purely subjective; it is a combination of detail labourers; in its machinery system, Modern Industry has a productive organism that is purely objective, in which the labourer becomes a mere appendage to an already existing material condition of production. In simple co-operation, and even in that founded on division of labour, the suppression of the isolated, by the collective, workman still appears to be more or less accidental. Machinery, with a few exceptions to be mentioned later, operates only by means of associated labour, or labour in common. Hence the co-operative character of the labour-process is, in the latter case, a technical necessity dictated by the instrument of labour itself.
